In order to ensure that it has an increase in service life, then for corrosion-resistant vacuum pump, how can we improve its service life in use?

1. Effect of temperature reduction

In the process of using construction machinery, firstly, it is necessary to avoid overload operation at low temperature, and then move or operate after reaching the specified temperature. Secondly, it is necessary to avoid the operation of machinery under high temperature because there are no problems at that time. During the process of mechanical operation, it is necessary to check the values on various temperature meters, and stop the machine immediately to check the problems The disease was eliminated in time. For those who can't find the reason at the moment, they must not work without disposal. In the normal operation, we should pay attention to check the operation status of the cooling system. For water-cooled machinery, it is necessary to check before daily operation to add cooling water. For air-cooled machinery, dust on the air-cooled system should be sorted out regularly to ensure that the cooling air duct is unblocked.

2. Effect of reducing mechanical impurities

As for the construction machinery operating in the places with bad environment and disorderly conditions, first, we should use high-quality and matching parts, lubricating oil and grease to block the source of harmful impurities; second, we should do a good job in the mechanical protection of the operation site to ensure that the corresponding organizations can work normally and avoid all kinds of impurities from entering the machinery of corrosion-resistant vacuum pump. For machinery with defects, we should try our best to Repair should be carried out in a standardized repair site. When repairing on site, protective measures should also be taken to avoid the pollution of dust and other impurities on the replaced parts before entering the machine.

3. Reduce various corrosion effects

Metal surface and surrounding media attack chemical or electrochemical effect and suffer from damage is called corrosion. This kind of corrosion effect will not only affect the normal operation of mechanical surface equipment, but also corrode the internal parts of corrosion-resistant vacuum pump. For example, rainwater and chemical substances in the air enter into the machinery through the external passage of mechanical parts, corroding the internal parts of machinery and accelerating the mechanical wear. Because the corrosion effect is sometimes invisible and intangible, it is simply ignored, so it is more harmful. In the application, the handling and operating personnel should take effective measures according to the local weather conditions and air pollution conditions to reduce the impact of chemical corrosion on the machinery. It is important to avoid the invasion of rainwater and chemical components in the air on the machinery.

4. Ensure normal working load

The size and nature of working load of construction machinery has an important impact on the loss process of corrosion-resistant vacuum pump. Generally speaking, the wear of parts increases with the increase of load. When the load of parts is higher than the uniform planning load, the wear will be intensified. When other conditions are the same, the wear of stable load is smaller than that under dynamic load.

In addition, the most direct way to improve the service life of corrosion-resistant vacuum pump is to start from the aspects of material, processing technology and technology. By essentially improving it, I believe its use will be more efficient. Then, through the introduction of the above methods to improve the service life, I hope that all users can pay more attention to it.