How to maintain the vacuum pump of vacuum packaging machine?

Addtime: 2020-07-18 Browse times: 1968

Every user should pay attention to the maintenance of packaging machinery, which can not only make the packaging machine work stably for a long time, but also prolong the service life of the packaging machine. Therefore, reasonable and good maintenance methods are particularly important. Let's introduce the maintenance of vacuum pump of vacuum packaging machine, so that your vacuum packaging machine can be used for a longer time.


1. Replace the exhaust filter. If the pump temperature rises significantly, the motor current reaches or exceeds the rated current, and there is oil smoke at the pump exhaust port, check whether the exhaust filter is blocked. If it is blocked, it should be replaced in time. The exhaust pressure gauge can be installed at the oil filling hole of the pump to check whether the filter is blocked. When the pressure exceeds 0.6 bar (gauge pressure), the exhaust filter can be replaced.


2. Replace the vacuum pump oil and oil filter. If the oil is black, emulsified or thickened due to contamination, the oil should be changed in time. At the same time, the oil filter should be replaced. Please clean the pump before adding new oil. Cleaning and oil changing steps: stop the pump to drain the hot oil; screw on the oil drain plug and run for 5-10 seconds to drain the oil completely; inject cleaning oil (32 ordinary mechanical oil) to 3 / 4 of the oil window height; run the vacuum pump for 5-10 minutes; stop the pump and drain the oil. If the drained oil is still turbid and fails to meet the requirements, repeat steps 3 and 4 until the oil is transparent; screw on the oil drain plug and run for 5-10 seconds; drain the oil completely; inject the specified new oil.


3. Vacuum pump oil XD, XQ series vacuum pump oil should use composite sh0528-92 standard vacuum pump oil. Vacuum pump oil of iso-vg32 viscosity grade is used when the ambient temperature is between 0 ℃ and 10 ℃. When the ambient temperature is between 10 ℃ and 40 ℃, the vacuum pump oil of iso-vg100 viscosity grade (original 1 ා vacuum pump oil) is used. When the vacuum pump is running, the oil level must be kept at 1 / 2 ~ 3 / 4 of the oil window height. Oil level and oil contamination should be checked frequently (once a week is recommended).


4. Clean the suction filter screen and keep the suction filter clean to avoid the drop of pumping speed.


5. Storage if the pump is not used for a long time, the oil should be drained and cleaned, and then injected with new oil, placed in a dry place.


Scan QR code and add wechat