Vacuum pump is made of stainless steel as the main material of vacuum equipment, so its advantage is not rusty. When using the equipment, we should be prepared for energy saving, which can prolong the service life of the equipment and reduce the power consumption of the equipment?

1、对于真空泵轴承的损坏：处理方法是检查修理或更换轴承。

1. For the vacuum pump bearing damage: the treatment method is to check, repair or replace the bearing.

2、转速过高：处理方法是检查驱动机和电源。

2. High speed: check the driver and power supply.

3、真空泵的液体密度增加：处理方法是检查液体密度。

3. Vacuum pump liquid density increase: treatment method is to check the liquid density.

4、泵轴弯曲：处理方法是矫正泵轴。

4. Pump shaft bending: the treatment method is to correct the pump shaft.

5、真空泵的填料压得太紧或干磨擦：处理方法是放松填料，检查水封管。

5. Vacuum pump packing pressed too tight or dry friction: treatment method is to relax the packing, check the water seal pipe.

6、叶轮与耐磨环、叶轮与壳有磨檫，处理方法是检查并修理。

6. Impeller and wear ring, impeller and shell friction, treatment method is to check and repair.

7、轴向力平衡装置失败：处理方法是检查平衡孔，回水管是否堵塞。

7. Failure of axial force balance device: the treatment method is to check whether the balance hole and return water pipe are blocked.

8、联轴器对中不良或轴向间隙太小：处理方法是检查对中情况和调整轴向间隙。

8. Poor alignment of coupling or too small axial clearance: the treatment method is to check the alignment and adjust the axial clearance.

总之，要减少真空泵的功耗，检修工作很重要，要定期更换零件，检查其他部件的情况，及时修理，检查液体密度，矫正泵轴，另外，正确的使用方法和保养，也可以减少设备的功耗。

In short, in order to reduce the power consumption of vacuum pump, maintenance work is very important. We should regularly replace parts, check the condition of other parts, repair in time, check the liquid density, and correct the pump shaft. In addition, the correct use and maintenance can also reduce the power consumption of the equipment.